| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 5 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Soft subgrade reinforcement Materials Gravel Stabilizer Driveway Geocell
Introduction
Geocells can be used to provide effective highway slope reinforcement. our geocell is designed for the reinforcement of weak soils and has many applications including the retention of soils on steep highway slopes.
The history of Geocell
The Engineers invented 3D geocelluar grids in the 1970's. The grid was designed for quick installation on beaches for amphibious beach assaults. It could be stored and moved in a very compact form, expanded and filled with sand, and ready at an instant for supporting vehicles, which would otherwise get stuck in the sand. The grids were also used extensively in Desert Storm. Soldiers would spread the grids out in the desert, fill cells with sand, and drive tanks and trucks on them. They would even land planes on them! The grids could easily be removed when no longer needed.
Geocells: Easy to move, quick and easy to install, and temporary, if need be.
WHY CELLS?
There is a complex science behind geocells. Simply put, materials confined by walls are compact and therefore stronger than when they are not confined.
If you are at the beach making a sand castle, imagine packing the bucket with sand. The sand is hard and compact. Turn the bucket over to dump that sand to build the castle, it stays intact, but is it strong? Is it hard? Without the walls it loses all strength. A continuous matrix of cells filled with any sort of confined aggregate makes an excellent foundation.
| Material | 100% Original HDPE | |
| Standard Color | Black Green Tan White | |
| Jointing | Ultrasonic Welding | |
| Surface |
Smooth, Textured, Perforated, Non-Perforated |
|
| Density(g/cm3) | >0.94 | ASTM D792 |
| Carbon Black Content(%) | 1.5~2.0~2.5 | ASTM D 1603 |
| Sheet Thickness(mm) | ≥1.25 ≥1.50 ≥1.75 | ASTM D 5199 |
| Seam Peel Strength(KN/m) | ≥14.2 | COE GL-86-19 |
| Low Temperature Brittleness(ºC) | <-77 | ASTM D 746 |
| Environment Stress Crack Resistance(Hours) | >4000 | ASTM D 1693 |
){kind=link}